Feb 10, 2015 Problem was resolved. This is how we fixed it. Loaded the latest drivers from HP for the Tape Drives and Media Changer Device. Hewlett Packard MSL G3 Series library (x64 based) Driver Provider HP, Driver Date, , Driver Version. 0Make StoreEver tape storage even simpler to use and manage Tape Library Management software Proactively configure, manage, and monitor an entire HPE tape library environment from a single pane of glass for maximum peace of mind. hp msl g3 tape library drivers
Revision History Drivers& software
Jun 16, 2016 We here use different HP ProLiant servers, all of them with Windows Server 2012 R2 and latest updates from MS and latest HP ProLiant Service Pack, which should bring tape drivers from HP. We can see the medium changer and the tape drives of the connected HP MSL libraries. hp msl g3 tape library drivers
HP MSL2024 0Drive 2U 24Slot Tape Library Part# AK379A (includes 24 slots, zero drives) this is the HP StoreEver MSL2024 HP Tape Autoloader, 24 slot, choose Drive C0H27A, C0H28A For LTO6 Hi, I cannot force BackupExec 2014 to see my robotic library HP MSL 2024 with one Ultrium3 drive. BE sees the Ultrium3 drive only, not the library. Symantec only installs the tape device driver the media changer driver will still be from HP. If you're experiencing library failures, update the firmware there is new firmware for hp msl g3 tape library drivers I have the above medium changer coming up with an error as there is no driver installed for it. The Library is a HP MSL 2024 and have downloaded the driver for the SCSI card. Where can I get the driver for the librarymedium changer as I don't have the CD anymore. Many Thanks& Regards, Paul. Section C: Procedure to upgrade firmware using Firmware Upgrade Tape (FUTFUP) Upgrade steps for MSL 2024: To update drive firmware from a firmware upgrade tape: 1. Load a firmware upgrade tape into the mailslot or any open slot. If all slots are full, remove Solved: I have purchased the tape library I need to down load the drivers. My operating system is windows 2003 R2 The backup software I am using is NetBackup Hi, I have HP MSL2024 1 LTO4 Ultr 1760 SAS Library connected to Wn2003 Enterprice 32bit server via HP P212ZM Smart Array Controller. Both LTO4 tape drive and library are detected by Windows OS with Bus Number 7, Target Id 0, LUN 0 and Bus Number 7, Target Id 0, LUN 1 appropriately.